Care Instructions

Harness Care Instructions

Light use: Wipe the harness and accessories with a clean cloth and warm water. This can be done while the harness is still assembled.

Medium use: Wipe down with a cloth and luke-warm, soapy water. You can also use antibacterial toy cleaner - just spray it on and wipe off the excess using a clean, dry cloth.

Tip: Open both sides of the Velcro belt. Place a towel on a table or the floor and open the harness up laying it flat on the towel. This gives you access to all parts of the harness and enables easier cleaning.

Heavy use: Use warm, soapy water to completely submerge the harness. Gently wash it by hand using a clean cloth while the harness is still submerged harness. Gently pat dry to remove excess moisture.

Alternatively, you can place the harness in a laundry bag and cold wash with a little detergent using the hand wash cycle of your washing machine. Be sure to remove the metal ring before doing so.

For best results, hang the harness on a coat hanger and secure using clothes pins. Hang in a well-ventilated area. Avoid drying on heaters or in direct sunlight. It is important to dry the harness immediately after cleaning in order to avoid rust-staining the hardware. 

Toys

All silicon toys from Strap-On Only are extremely easy to care for. They can be cleaned with anti-bacterial toy cleaner, washed with hot soapy water, boiled, bleached with a solution of 10% bleach or simply placed on the top shelf of your dishwasher.

NOTE: Silicon dildos with vibrating units like the best-selling Doc Johnson Blush and Power Bullet are best cleaned using anti-bacterial toy cleaner or soapy water.

Tip: Remove batteries from your vibrating toy after use to prevent leaking, power drain or accidental activation. We like to keep our batteries in a separate sealed bag and store them away with our toy.

Important: Make sure to use only water based lubricant with your silicon toys.